Noble's Pokemon Clay Figures (Updated 2/12/19)
Nov 7, 2018 14:01:12 GMT -5
tiger beetle, ππππππππππππ, and 5 more like this
Post by The Noble Dragon on Nov 7, 2018 14:01:12 GMT -5
Hi
I make clay figures of Pokemon and have been for about a year. This is where I will post pictures of my figures.
I do not take requests
I do have an etsy shop but you don't have to look at it.
Pictures will probably be in the form of my instagram posts bc it's easier to upload them that way!
Follow me on instagram, i'm theartfuldragon
Starting from oldest to newest
Bulbasaur
made in about.... October of 2017
made with Air Dry Clay and Watercolors.... not a good mix
Litten
Made in about November 2017
Made it for my friend for a Christmas Present
made with Air Dry Clay and Watercolors
Mini Bulbasaur
Made in.... March 2018?
Made it for a fellow Bulbasaur lover who works at a GameStop
Made with Polymer Clay and Watercolors.... still not the best mix
Rowlet and Bulbasaur size comparisons
Rowlet made at the same time as Bulbasaur so in about March of 2018?
I really should get a seperate pic of Rowlet at some point
Rowlet is made from Polymer clay and Watercolors
Squirtle and Charmander
These guys were made in September of 2018! Had to take a break to move.
Made them out of Polymer Clay and Acrylic paint! Finally found the mediums that worked best for me.
Chikorita
Made in September 2018 after I finished Charmander and Squirtle
Made of Polymer Clay and Acrylic with a wire in the leaf to keep it upright
Cyndaquil
Made at the end of September after Chikorita
Made of Polymer Clay and Acrylic
Torchic
Made October 2018
Made out of Polymer Clay and Acrylic, base is wood with wood stain
First Pokemon I put on a Base with let me play with the stances a bit!
Oshawott
Made October 2018 at the same time as Torchic
Made out of Polymer Clay and Acrylic, base is wood
Shiny Snivy
Made October 2018 after Torchic and Oshawott
Made out of Polymer Clay and Acrylic, base is wood stained
First Shiny Pokemon I made! Really proud of how he came out
Zenith Marshadow
Made October 2018 at same time as Snivy
Made out of Polymer Clay and Acrylic, base is chunk of a tree branch
First non Starter Pokemon! made this little guy for my gf for Halloween bc she loves Marshadow.
Chespin
Made October 2018 After Snivy and Marshadow
Made out of Polymer Clay and Acrylic, base is wood
Piplup
Made October 2018 After Chespin
Made out of Polymer Clay and Acrulic, Base is wood
Totodile
Made in like December 2018
I used a different Polymer clay than normal. Super Sculpty! Took some getting used to but I like it
Still painted with acrylic paints and put on a wood base.
Froakie
Made January 2019
Super Sculpty Polymer clay and Acrylic Paint
Funny story...... I broke Froakies arm in like 4 places on a second bake..... but a ton of super glue and paint covered it mostly up
Mudkip
Made January 2019
Super Scultpy Polymer Clay and Acrylic paint
Non-Starter Pokemon:
Phantump
Made 10/31/18 with polymer clay and acrylic paint and a disc from a treebranch as a base.
I love Phantump and wanted to make him for Halloween! I'm really happy with how he turned out!
Pokeballs:
PokeBall, GreatBall, UltraBall and MasterBall all made at the same time in about September 2018
Made from Polymer Clay and Acrylic (waiting to buy black plastic discs for bases)
Nest Ball, Quick Ball, Dusk Ball:
Made these yesterday! 11/9/18 at least I finished and glazed them!
Made from Polymer Clay and Acrylic
I like how these turned out compared to the previous ones bc I painted the black/orange bands before I added the second layer of clay that way it wasn't as messily painted! Turned out a lot better.
Non Pokemon Related Figures:
Baron (From Heartbound)
Fun fact: The creators of the video game Heartbound actually saw my figurine I made of the character Baron and commented on it on one of their twitch streams! I actually became a VIP on the streams bc of this!
I'm actually really proud of how he came out, I haven't made a non Pokemon clay figure before (actually I made a Hedgehog for my friend but that was waaaaaay back when i made Litten) out of Polymer Clay and I'm super proud of how he came together! He was also the fastest figure I've made to date! I started and fully completed him (paint and glaze and all) in about 4 hours! The others took me much longer than that!
Update on Baron: I got a chance to meet Pirate Software, the developers of Heartbound and actually gave him to them! They were really happy and gave me one of the first plush Barons they had in return!!!! I got to spend a good like 5 hours with Thor and Shaye and it was a ton of fun!
Current Project:
Numel (For a friend) Just have to glaze
Turtwig Just needs a paint job and glazing
Gengar (For a friend) Needs paint and glazing
I make clay figures of Pokemon and have been for about a year. This is where I will post pictures of my figures.
I do not take requests
I do have an etsy shop but you don't have to look at it.
Pictures will probably be in the form of my instagram posts bc it's easier to upload them that way!
Follow me on instagram, i'm theartfuldragon
Starting from oldest to newest
Bulbasaur
http://instagr.am/p/BdWcgHCA78t
made in about.... October of 2017
made with Air Dry Clay and Watercolors.... not a good mix
Litten
http://instagr.am/p/BltPW9qB-_q
Made in about November 2017
Made it for my friend for a Christmas Present
made with Air Dry Clay and Watercolors
Mini Bulbasaur
http://instagr.am/p/BkPG97zhtTd
Made in.... March 2018?
Made it for a fellow Bulbasaur lover who works at a GameStop
Made with Polymer Clay and Watercolors.... still not the best mix
Rowlet and Bulbasaur size comparisons
http://instagr.am/p/BkRS1exBN5X
Rowlet made at the same time as Bulbasaur so in about March of 2018?
I really should get a seperate pic of Rowlet at some point
Rowlet is made from Polymer clay and Watercolors
Squirtle and Charmander
http://instagr.am/p/Bl8oSl-B3nk
These guys were made in September of 2018! Had to take a break to move.
Made them out of Polymer Clay and Acrylic paint! Finally found the mediums that worked best for me.
Chikorita
http://instagr.am/p/Bm4teoighr0
Made in September 2018 after I finished Charmander and Squirtle
Made of Polymer Clay and Acrylic with a wire in the leaf to keep it upright
Cyndaquil
http://instagr.am/p/BoXn5YmBEvf
Made at the end of September after Chikorita
Made of Polymer Clay and Acrylic
Torchic
http://instagr.am/p/BouylbUnF0Z
Made October 2018
Made out of Polymer Clay and Acrylic, base is wood with wood stain
First Pokemon I put on a Base with let me play with the stances a bit!
Oshawott
http://instagr.am/p/BouzEuxHhe0
Made October 2018 at the same time as Torchic
Made out of Polymer Clay and Acrylic, base is wood
Shiny Snivy
http://instagr.am/p/BpIQCM3BcmB
Made October 2018 after Torchic and Oshawott
Made out of Polymer Clay and Acrylic, base is wood stained
First Shiny Pokemon I made! Really proud of how he came out
Zenith Marshadow
http://instagr.am/p/BpIQtlCBFq1
Made October 2018 at same time as Snivy
Made out of Polymer Clay and Acrylic, base is chunk of a tree branch
First non Starter Pokemon! made this little guy for my gf for Halloween bc she loves Marshadow.
Chespin
http://instagr.am/p/Bph1KQcB825
Made October 2018 After Snivy and Marshadow
Made out of Polymer Clay and Acrylic, base is wood
Piplup
http://instagr.am/p/Bph1q_kBTlZ
Made October 2018 After Chespin
Made out of Polymer Clay and Acrulic, Base is wood
Totodile
http://instagr.am/p/BrVxrFwHEkL
Made in like December 2018
I used a different Polymer clay than normal. Super Sculpty! Took some getting used to but I like it
Still painted with acrylic paints and put on a wood base.
Froakie
http://instagram.com/p/Bs4ZQbOhyXZ
Made January 2019
Super Sculpty Polymer clay and Acrylic Paint
Funny story...... I broke Froakies arm in like 4 places on a second bake..... but a ton of super glue and paint covered it mostly up
Mudkip
http://instagram.com/p/Bs4aZrohlpI
Made January 2019
Super Scultpy Polymer Clay and Acrylic paint
Non-Starter Pokemon:
Phantump
https://www.instagram.com/p/BrVyKp3HQqg
Made 10/31/18 with polymer clay and acrylic paint and a disc from a treebranch as a base.
I love Phantump and wanted to make him for Halloween! I'm really happy with how he turned out!
Pokeballs:
http://instagr.am/p/BptLOcUB-Xz
PokeBall, GreatBall, UltraBall and MasterBall all made at the same time in about September 2018
Made from Polymer Clay and Acrylic (waiting to buy black plastic discs for bases)
Nest Ball, Quick Ball, Dusk Ball:
http://instagr.am/p/BqA_GcnhMBu
Made these yesterday! 11/9/18 at least I finished and glazed them!
Made from Polymer Clay and Acrylic
I like how these turned out compared to the previous ones bc I painted the black/orange bands before I added the second layer of clay that way it wasn't as messily painted! Turned out a lot better.
Non Pokemon Related Figures:
Baron (From Heartbound)
http://instagr.am/p/Bqi8k_eHw5K
Fun fact: The creators of the video game Heartbound actually saw my figurine I made of the character Baron and commented on it on one of their twitch streams! I actually became a VIP on the streams bc of this!
I'm actually really proud of how he came out, I haven't made a non Pokemon clay figure before (actually I made a Hedgehog for my friend but that was waaaaaay back when i made Litten) out of Polymer Clay and I'm super proud of how he came together! He was also the fastest figure I've made to date! I started and fully completed him (paint and glaze and all) in about 4 hours! The others took me much longer than that!
Update on Baron: I got a chance to meet Pirate Software, the developers of Heartbound and actually gave him to them! They were really happy and gave me one of the first plush Barons they had in return!!!! I got to spend a good like 5 hours with Thor and Shaye and it was a ton of fun!
Current Project:
Numel (For a friend) Just have to glaze
Turtwig Just needs a paint job and glazing
Gengar (For a friend) Needs paint and glazing